Ulation Study Though the cyclic depressurization system of Konno’s analysis consisted of a major Though the cyclic depressurization process we utilized each a primary and secondary dedepressurization stage and shut-in stage [20], of Konno’s study consisted of a main depressurization stage and shut-in stage [20], we employed pore stress duringsecondary depressurization stage to make much more gas and improve both a principal as well as the secondary pressurization stage to produce a lot more gas and enhance pore are the bottomhole pressure depressurization stage. The parameters in the case study pressure through the secondary depressurization stage. The parametersand secondary production stage, as shown in and production time of each the key of your case study are the bottomhole stress and production time of each thethat the bottomhole stress and production time from the Table four. The base case assumed major and secondary production stage, as shown in Table four. The base case assumed werethe bottomhole stress and production time ofMPa primary depressurization stage that 9 MPa and eight days, respectively, in comparison to 16 the principal depressurization stage had been 9 MPa and 8 days,shut-in of gascompared towas also and two days for secondary depressurization stage. The respectively, production 16 MPa and two days for secondary depressurization stage. The shut-in of gas production was also regarded as solely through the secondary depressurization stage. So that you can analyze an considered solely DNQX disodium salt Technical Information throughout the secondary depressurization the non-cyclic depressurization impact of the cyclic depressurization system, final results of stage. In order to analyze an effect in the cyclicrepresented, plus the production time was set as 400 days. The non-cyclic case had been also depressurization process, final results with the non-cyclic depressurization case were also represented,applied the values of your base case at as 400 days. The non-cyclic dedepressurization case plus the production time was set both the primary and secondary pressurization case utilised the values of the base case at both the main and secondary depressurization stage. depressurization stage.No. Table 4. Input data for the Seclidemstat Autophagy cyclic-depressurization case study. Table four. Input data for the cyclic-depressurization case study. Stage PropertyStage -No. Non-cyclic case Non-cyclic case (Figures 96) (Figures 96) Base case-Base caseCase study 1 (Figures 9 and10)Case study 1 Case study two (Figures 11and 12) 9 and 10) (FiguresCase study 2 (Figures 11 and 12)Case study four (Figures 15 and 16)Case study three (Figures 13 and 14)Main production stage Major Secondary production stage production stage Secondary Primary production production stage stage Secondary production stage Major productionPrimary stage production stage Secondary Secondary production production stage stage Major production stage Principal Secondary production stage production stage Major Secondary production stage production stage Secondary production stageProperty Bottomhole pressure (MPa) Bottomhole pressure (MPa) Production Production time (days) time (days) Bottomhole pressure (MPa) Bottomhole pressure (MPa) (days) Production time Bottomhole pressure (MPa) Production time (days) Production time (days) Bottomhole stress (MPa) Bottomhole stress (MPa) Production Production time (days) time (days) Bottomhole pressure (MPa) Bottomhole stress (MPa) (days)six Production time Bottomhole stress (MPa) Production time (days) 8 Production time (days) Bottomhole pressure (MPa).